Frequently Asked Questions about Lockking Sliding Glass Door Lock Bar
If you adjust the rollers at the bottom of the sliding glass door so the door moves upward, this will take any play out of the door, Click the following link for instructions: How to Raise a sliding glass door.
Click the Following Link for Instructions: Lockking Installation Instructions
Usage and temperature changes can make the security bar need an adjustment. Just move the adjustment screw ahead 1/8″ while in the unlocked position, and tighten the screw securely. If that doesn’t do it repeat the movement of the screw until you are satisfied.
Yes there is a security bar for doggy doors that are fit onto a sliding glass door. When you go to the Shop Page you will find the Pet Door Lock. Click the Following for more Info: Pet Door Lock Bars
No, there is no difference.
Lockking Security Lock Bars comes in 3 colors, White,Black, and Stainless Steel.

A tape measure, pencil and the supplied hex wrench.
The Bar can be installed at various heights depending on the user. For normal hand operation set at about 40″ or the same height as your door handle (Recommended). If you need to set it higher, do a dry fit by opening the security bar and putting it next to the door to see if it will hit the top of the opening .
We are proud to make Lockking Security Lock Bars in Oregon, USA
The Lock Bar is made from Aircraft Quality Aluminum to Lockking Specs.
The Security Lock Bar comes in a variety of sizes from 19″ to 48″ depending on the application, check the Shop Page.
JTC Solutions LLC warranties all Lockking Products for a period of 5 years for any mechanical defects. JTC Solutions LLC assumes no responsibility for any misuse,improper installation
or any damages that occur from use of. 2018
Similar Websites to Visit: www.lockking.org , www.lockkingonline.com , www.petdoorlock.com